在使用CCS3.3时,添加的头文件包含在Document里,怎么加到include里?

CCS3.3添加头文件，被添加到Document里头去，注意，CCS3.3是不需要手工添加.h的文件的，只要在文件中include了头文件，CCS会自动搜索头文件并且添加到include文件夹中去，搜索路径：Project—>Build

Options——>Compiler——>Processer——>Include search

path，指定一个搜索路径就可以了，不过最方便的方法，还是直接将所有头文件、源文件、cmd文件拷到工程文件夹下，然后build

all一下，编译器就自动添加.h文件进include了，注意这种情况下不需要指定路径。

1、要在Memory Section Manager属性中为“Segment For DSP/BIOS Objects” 和 “Segment For malloc()/free()”分配Dynamic Memory Heaps，必须首先在要分配的段（比如，IRAM）中勾选“create a heap in this memory“，并给出heaps size。

2、要把*.tcf文件生成的*.cmd文件手动加入工程中，否则编译报错如下：

------------------------------ test.pjt - Debug ------------------------------

Warning: The project has no cmd file while the Text Linker is selected

[Linking...] "D:\CCStudio_v3.3\C6000\cgtools\bin\cl6x" -@"Debug.lkf"

<Linking>

>>warning: creating output section .gblinit without SECTIONS specification

>>warning: creating output section .mem without SECTIONS specification

>>warning: creating output section .rtdx_data without SECTIONS specification

>>warning: creating output section .sys without SECTIONS specification

>>warning: creating output section .clk without SECTIONS specification

>>warning: creating output section .hst1 without SECTIONS specification

>>warning: creating output section .hst without SECTIONS specification

>>warning: creating output section .pip without SECTIONS specification

>>warning: creating output section .hst0 without SECTIONS specification

>>warning: creating output section .hwi_vec without SECTIONS specification

>>warning: creating output section .swi without SECTIONS specification

>>warning: creating output section .printf without SECTIONS specification

>>warning: creating output section .sts without SECTIONS specification

>>warning: creating output section .tsk without SECTIONS specification

>>warning: creating output section .TSK_idle$stk without SECTIONS specification

>>warning: creating output section .idlcal without SECTIONS specification

>>warning: creating output section .idl without SECTIONS specification

>>warning: creating output section .LOG_system$buf without SECTIONS

specification

>>warning: creating output section .log without SECTIONS specification

>>warning: creating output section .sysinit without SECTIONS specification

>>warning: creating output section .vers without SECTIONS specification

>>warning: entry point symbol _c_int00 undefined

undefinedfirst referenced

symbol in file

-------------------------

SWI_D_rdytab d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

IRAM$B d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_EXC_initd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_GBL_procId d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

__HOOK_knlId d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_KNL_exitd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

IRAM$L d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

TSK_VCREATEFXN d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_UTL_doError d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

PIP_F_start d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

GBL_boot d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

TSK_VDELETEFXN d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

KNL_glue d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_UTL_doAbort d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

IDL_F_loop d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_CLK_DFLTMICROSECS d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_GBL_cacheInit64Pd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_EXC_dispatchd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_CLK_htimePerLtime d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

GBL_stackbeg d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_CLK_D_tddr d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_UTL_doPutc d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_MEM d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

PRD_F_tick d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

__HOOK_NUMHOOKS d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_CLK_D_microseconds d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

RTA_F_or d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

TRC_R_mask d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

GBL_stackend d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_c_int00 d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_TSK_config d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_OBJ_table d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

HWI_A_VECS d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_FXN_F_nop d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_CLK_enableTimer d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_CLK_D_prd d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

IDL_D_calibrate d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_TSK d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_KNL_run d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

LNK_dspFrameRequestMask d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

CLK_F_isrd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

PIP_D_tabbeg d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

TRC_cinitd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_UTL_haltd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_MEM_initd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

RTA_F_dispatch d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_TSK_startup d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_TSK_setup d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_KNL_queues d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

CLK_A_TABBEG d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

LNK_F_dataPump d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

TSK_VEXITFXN d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

HWI_F_dispatch d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_RTDX_Poll d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_TSK_initd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

IDL_D_busyObjd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_TSK_exitd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

SWI_F_enable d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

FXN_F_rund:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_GBL_getVersion d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_CLK_inputClock d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

GBL_initdone d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_HWI_dispatchTab d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

LNK_dspFrameReadyMaskd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

IDL_F_busy d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

>> error: symbol referencing errors - './Debug/test.out' not built

>>Compilation failure

Build Complete,

2 Errors, 23 Warnings, 0 Remarks.

3、

[main.c] "D:\CCStudio_v3.3\C6000\cgtools\bin\cl6x" -g -pdsw225 -fr"D:/CCStudio_v3.3/MyProjects/test/Debug" -d"_DEBUG" -me -mv6400+ -@"Debug.lkf" "main.c"

"main.c", line 20: warning: function declared implicitly

[Linking...] "D:\CCStudio_v3.3\C6000\cgtools\bin\cl6x" -@"Debug.lkf"

<Linking>

Build Complete,

0 Errors, 1 Warnings, 0 Remarks.

warning 的原因是对应行的元素没有声明。

解决办法就是加入声明。

举例如下：

#include <std.h>

#include <string.h>

//#include <stdio.h> //打开该句就可以了

void main(void)

{

unsigned int i

unsigned int sum=0

for(i = 0i<=100i++ )

{

sum += i

}

printf("the sum = %d .\n",sum)

printf("the program run over!\n")

printf("the program run over!\n")

针对每一个系列的DSP，TI官方网站上都有相应的头文件和cmd文件，你可以去TI的官网上搜索，搜索器件型号比如TMS320F2812或者关键字C/C++ Header Files，可以下载的。下载以后，解压到你想要的位置，就可以通过添加文件的方法添加了。

TI提供的头文件和cmd文件很详细，具体，基本上就够用了，当然cmd文件有时候还是要自己配置的，但是对于新手入门来说，TI提供的cmd文件已经够用了。等到你熟悉cmd文件格式和要求，就可以自己写了，这方面的资料TI官网上也有

---