1.先删除给ONU下发的管理地址:
undo
ont
ipconfig
0
7
ip-address
192.168.68.182
mask
255.255.255.0
gateway
192.168.68.254
manage-vlan
996
priority
0
2.再删除ONU在OLT上的MAC地址认证:
undo
ont
add
0
7
mac-auth
0018-82E8-1007
snmp
ont-lineprofile-id
13
desc
"XXX"
前面只是以前的脚本,具体我也忘了,很久没做华为的产品了,你参考下吧
删除已经注册的ONUshow gpon onu uncfg (查看OLT所有未配置的ONU)
con t (进入配置模式)
interface gpon-olt_1/3/1 (进入指定PON口)
no onu 1 (删除指定ONU ID)
========================
先登陆到OLT上注册ONU、透传vlan、下发IP:
con t (进入配置模式)
interface gpon-olt_0/1/2 进入olt第一槽位第二PON口下注册onu
onu 12 type ZTEG-F822 sn ZTEGB0004C93在olt第一槽位第二PON口下注册第12台onu
interface gpon-onu_0/1/2:12
name ONU-2:12 (ONU简单注明)
tcont 2 profile UP-50M (加入宽带50M的" UP-50M"带宽模板)
gemport 1 name gemport-1 unicast tcont 2
service-port 1 vport 1 user-vlan 200 svlan 200 (加入主VLAN)
service-port 2 vport 2 user-vlan 101 to 124 svlan 1060(内层VLAN to内层VLAN, svlan外层VLAN)
不知道你想问的是不是在OLT上把已注册的ONU删除,如果是的话我告诉你,你可以这样:在config模式下输入interface epon-olt_0/x/x回车进入该ONU对应的PON口输入no onu x即可欢迎分享,转载请注明来源:内存溢出
评论列表(0条)