DS2141A Creating a DSESF Chan

DS2141A Creating a DSESF Chan,第1张

Abstract: DS2141A can be used for creaTIng a DS/ESF Channel Service Unit. This applicaTIon note has the adequate informaTIon and schemaTIc on how to use this device DS2141A to create this Channel Service Unit.

DS2141A Creating a DSESF Chan,Figure 1.,第2张
Figure 1.

Notes:
  1. This application uses "looped" timing (i.e., RCLK is tied to TCLK)
  2. MHz clock source is used as a transmit clock if no signal exists on the receive side; if the DS2291 declares a carrier loss, then the source of the TCLK will be switched from the recovered clock to the locally accurate 1.544 MHz source.
  3. The DS2141A will be used to detect the normal loop codes and to decode and encode the Facility Data Link (upon request, transportable C code firmware is available from Dallas Semiconductor that implements both ANSI T1.403 and AT&T TR54016).


欢迎分享,转载请注明来源:内存溢出

原文地址: http://outofmemory.cn/dianzi/2538530.html

(0)
打赏 微信扫一扫 微信扫一扫 支付宝扫一扫 支付宝扫一扫
上一篇 2022-08-05
下一篇 2022-08-05

发表评论

登录后才能评论

评论列表(0条)

保存