例如:电灯泡的灯丝用钨丝制造,灯丝正常发光时的电阻要比常温下的电阻大多少?
钨的电阻随温度升高而增大,温度升高1℃电阻约增大千分之五.灯丝发光时温度约2000℃,所以,电阻值约增大10倍.灯丝发光时的电阻比不发光时大得多,刚接通电路时灯丝电阻小电流很大,用电设备容易在这瞬间损坏.
The power semiconductor device and the micro electronpower semiconductor device is in the semiconductor device important link, it and the micro electron component relations is close, because the micro electron component required power semiconductor device forms a complete set provides its power source and the execution system.If develops rapidly computer, when CPU from 286,486, to gallops I, II, III, IV…When development, to took the power source the power semiconductor request increasingly is also harsh.For example the present is developing the voltage to be smaller than 1 volt, on the electric current hundred amperes power sources, this must develop the newest MOSFET component to be able to meet the needs.In order to achieve these renew unceasingly the performance index, the power semiconductor device must use the micro electron component similar fine craft.This will also be this article is detailed narrates.
The power semiconductor device and the integrated circuit close union, in the one has arranged in order four aspects in the chart: Namely
1) power and micro electron component in chip manufacture craft already day by day close: The power MOS component in order to achieve a better performance, for example requests to pass condition the resistance lowly, its craft already from 20 year ago several microns technologies rapidly to submicron even deep submicron development.This and the micro electron component development is consistent.
2) the MOS component seal technology is also approaching to the integrated circuit.These for years, the power MOS component has used has inverted (Flip) likely, ball grid array (BGA) and packing forms and so on multi-chip module (MCM).These all are the quite new integrated circuit packing forms.
3) looked from the component structure that, makes the power MOS component and the integrated circuit in the identical chip perhaps the identical packing, is one of recent development directions.Therefore the power semiconductor device equates simply for established separately the component no longer to be appropriate.Take the IR Corporation product as the example, the power integrated circuit, perhaps and IC does in the same place power component, as well as the special advanced component, held its product one above the half.
4) the comprehensive solution (Total Solution) is each kind of component finally conceives.Seeks the component the function integrity, in the solution application all questions is the component manufacturer's ideal.Had the integrated circuit to enter the power semiconductor device, this kind of comprehensive solution plan was easier to realize.Not only to the low power direction is so, even the high efficiency direction is also pursuing a greater integration rate and the comprehensive solution.Certainly, contains all functions by a component not necessarily forever is the preferred plan.For example must consider the rate of finished products the loss, but also must pay attention to the protection customer to develop the electric circuit on own initiative the enthusiasm.
欢迎分享,转载请注明来源:内存溢出
评论列表(0条)