#########################################################################################
# MARK: pod update、pod install 与版本号选择
#更新指定第三方库
#<1>终端执行: pod update 库名
# 注释:pod update 会将所有库更新为最新版,前提是不超过设定的最高版本
#<2> pod update 库名 --verbose --no-repo-update 该命令只更新指定的库,其它库忽略
#
#<3>只安装新增库,不更新已安装的库
# pod install 把Podfile内全部的库更新重新安装, 只安装新添加库,不改变已存在的库的版本
# pod install --verbose --no-repo-update 该命令只安装新添加的库,已更新的库忽略
# pod install --verbose --no-repo-update 删除指定库、该命令只安装新添加的库,已添加的库忽略
#
#########################################################################################
#一个简单的podfile:
#pod 'AFNetworking', '~> 1.0' 版本号可以是1.0,可以是1.1,1.9,但必须小于2
#
#-个更简单的podfile:
#pod 'AFNetworking', '1.0' // 版本号指定为1.0
#
#一个更更简单的podfile:
#pod 'AFNetworking', // 不指定版本号,任何版本都可以
#————————————————————————————————————————————————————————————————————————————————————————
#一个复杂的podfile:
#platform :ios, '6.0'
#inhibit_all_warnings!
#
#xcodeproj 'MyProject'
#
#pod 'ObjectiveSugar', '~> 0.5'
#
#target :test do
# pod 'OCMock', '~> 2.0.1'
#end
#
#post_install do |installer|
# installer.project.targets.each do |target|
# puts target.name
# end
#end
#————————————————————————————————————————————————————————————
#下面是podfile指定版本号时的逻辑运算符:
#Besides no version, or a specific one, it is also possible to use logical operators:
#'> 0.1' Any version higher than 0.1 0.1以上
#'>= 0.1' Version 0.1 and any higher version 0.1以上,包括0.1
#'< 0.1' Any version lower than 0.1 0.1以下
#'<= 0.1' Version 0.1 and any lower version 0.1以下,包括0.1
#In addition to the logic operators CocoaPods has an optimisic operator ~>:
#
#'~> 0.1.2' Version 0.1.2 and the versions up to 0.2, not including 0.2 and higher 0.2以下(不含0.2),0.1.2以上(含0.1.2)
#'~> 0.1' Version 0.1 and the versions up to 1.0, not including 1.0 and higher 1.0以下(不含1.0),0.1以上(含0.1)
#'~> 0' Version 0 and higher, this is basically the same as not having it. 0和以上,等于没有此约束
#########################################################################################
# Uncomment the next line to define a global platform for your project
# 此两个用来提高pod下载速度
# source 'https://github.com/CocoaPods/Specs.git' (提高)
# source 'https://github.com/aliyun/aliyun-specs.git'(此为阿里云的)
# source 'https://cdn.cocoapods.org/'(提高)
#————————————————————————————————————————————————————————————
##############################################################
source 'https://github.com/CocoaPods/Specs.git'
source 'https://cdn.cocoapods.org/'
platform :ios, '8.3'
target 'PageJTotalProject' do
# Comment the next line if you're not using Swift and don't want to use dynamic frameworks
use_frameworks!
pod 'MJRefresh', '~> 3.1.14.1'
欢迎分享,转载请注明来源:内存溢出
评论列表(0条)