#include<graphics.h>
#include<stdio.h>
#include<math.h>
#include<dos.h>
#define PI 3.1415926 /*定义常量*/
#define UP 0x4800 /*上移↑键：修改时间*/
#define DOWN 0x5000 /*下移↓键指歼：修改时间*/
#define ESC 0x11b /*ESC键 ： 退出系统*/
#define TAB 0xf09 /*TAB键 ： 移动光标*/
/*函数声明*/
int keyhandle(int,int)/*键盘按键判断，并调用相关函数唯纤冲处理*/
int timeupchange(int) /*处理上移按键*/
int timedownchange(int)/*处理下移按键*/
int digithour(double)/*将double型的小时数转换成int型*/
int digitmin(double) /*将double型的分钟数转换成int型*/
int digitsec(double) /*将double型的秒钟数转换成int型*/
void digitclock(int,int,int )/*在指定位置显示时钟或分钟或秒钟数*/
void drawcursor(int)/*绘制一个光标*/
void clearcursor(int)/*消除前一个光标*/
void clockhandle()/*时钟处理*/
double h,m,s/*全局变量:小时，分，秒*/
double x,x1,x2,y,y1,y2/*全局变量:坐标值*/
struct time t[1]/*定义一个time结构类型的数组*/
main()
{
int driver, mode=0,i,j
driver=DETECT/*自动检测显示设备*/
initgraph(&driver, &mode, "")/*初始化图形系统*/
setlinestyle(0,0,3)/*设置当前画线宽度和类型:设置三点宽实线*/
setbkcolor(0)/*用调色板设置当前背景颜色*/
setcolor(9)/*设置当前画线颜色*/
line(82,430,558,430)
line(70,62,70,418)
line(82,50,558,50)
line(570,62,570,418)
line(70,62,570,62)
line(76,56,297,56)
line(340,56,564,56) /*画主体框架的边直线*/
/*arc(int x, int y, int stangle, int endangle, int radius)*/
arc(82,62,90,180,12)
arc(558,62,0,90,12)
setlinestyle(0,0,3)
arc(82,418,180,279,12)
setlinestyle(0,0,3)
arc(558,418,270,360,12) /*画主体框架的边角弧线*/
setcolor(15)
outtextxy(300,53,"CLOCK")/*显示标题*/
setcolor(7)
rectangle(342,72,560,360)/*画一个矩形,作为时钟的框架*/
setwritemode(0)/*规定画线的方式。mode=0, 则表示画线时将所画位置的原来信息覆盖*/
setcolor(15)
outtextxy(433,75,"CLOCK")/*时钟的标题*/
setcolor(7)
line(392,310,510,310)
line(392,330,510,330)
arc(392,320,90,270,10)
arc(510,320,270,90,10)/*绘制电竖神子动画时钟下的数字时钟的边框架*/
/*绘制数字时钟的时分秒的分隔符*/
setcolor(5)
for(i=431i<=470i+=39)
for(j=317j<=324j+=7){
setlinestyle(0,0,3)
circle(i,j,1)/*以(i, y)为圆心,1为半径画圆*/
}
setcolor(15)
line(424,315,424,325)/*在运行电子时钟前先画一个光标*/
/*绘制表示小时的圆点*/
for(i=0,m=0,h=0i<=11i++,h++){
x=100*sin((h*60+m)/360*PI)+451
y=200-100*cos((h*60+m)/360*PI)
setlinestyle(0,0,3)
circle(x,y,1)
}
/*绘制表示分钟或秒钟的圆点*/
for(i=0,m=0i<=59m++,i++){
x=100*sin(m/30*PI)+451
y=200-100*cos(m/30*PI)
setlinestyle(0,0,1)
circle(x,y,1)
}
/*在电子表的左边打印帮助提示信息*/
setcolor(4)
outtextxy(184,125,"HELP")
setcolor(15)
outtextxy(182,125,"HELP")
setcolor(5)
outtextxy(140,185,"TAB : Cursor move")
outtextxy(140,225,"UP : Time ++")
outtextxy(140,265,"DOWN: Time --")
outtextxy(140,305,"ESC : Quit system!")
outtextxy(140,345,"Version : 2.0")
setcolor(12)
outtextxy(150,400,"Nothing is more important than time!")
clockhandle()/*开始调用时钟处理程序*/
closegraph()/*关闭图形系统*/
return 0/*表示程序正常结束,向 *** 作系统返回一个0值*/
}
void clockhandle()
{
int k=0,count
setcolor(15)
gettime(t)/*取得系统时间,保存在time结构类型的数组变量中*/
h=t[0].ti_hour
m=t[0].ti_min
x=50*sin((h*60+m)/360*PI)+451/*时针的x坐标值*/
y=200-50*cos((h*60+m)/360*PI)/*时针的y坐标值*/
line(451,200,x,y)/*在电子表中绘制时针*/
x1=80*sin(m/30*PI)+451/*分针的x坐标值*/
y1=200-80*cos(m/30*PI)/*分针的y坐标值*/
line(451,200,x1,y1)/*在电子表中绘制分针*/
digitclock(408,318,digithour(h))/*在数字时钟中，显示当前的小时值*/
digitclock(446,318,digitmin(m))/*在数字时钟中，显示当前的分钟值*/
setwritemode(1)
/*规定画线的方式,如果mode=1,则表示画线时用现在特性的线
与所画之处原有的线进行异或(XOR) *** 作,实际上画出的线是原有线与现在规定
的线进行异或后的结果。因此, 当线的特性不变, 进行两次画线 *** 作相当于没有
画线，即在当前位置处清除了原来的画线*/
for(count=2k!=ESC){ /*开始循环，直至用户按下ESC键结束循环*/
setcolor(12)/*淡红色*/
sound(500)/*以指定频率打开PC扬声器,这里频率为500Hz*/
delay(700)/*发一个频率为500Hz的音调,维持700毫秒*/
sound(200)/*以指定频率打开PC扬声器,这里频率为200Hz*/
delay(300)
/*以上两种不同频率的音调，可仿真钟表转动时的嘀哒声*/
nosound()/*关闭PC扬声器*/
s=t[0].ti_sec
m=t[0].ti_min
h=t[0].ti_hour
x2=98*sin(s/30*PI)+451/*秒针的x坐标值*/
y2=200-98*cos(s/30*PI)/*秒针的y坐标值*/
line(451,200,x2,y2)
/*绘制秒针*/
/*利用此循环,延时一秒*/
while(t[0].ti_sec==s&&t[0].ti_min==m&&t[0].ti_hour==h)
{ gettime(t)/*取得系统时间*/
if(bioskey(1)!=0){
k=bioskey(0)
count=keyhandle(k,count)
if(count==5) count=1
}
}
setcolor(15)
digitclock(485,318,digitsec(s)+1)/*数字时钟增加1秒*/
setcolor(12)/*淡红色*/
x2=98*sin(s/30*PI)+451
y2=200-98*cos(s/30*PI)
line(451,200,x2,y2)
/*用原来的颜色在原来位置处再绘制秒针，以达到清除当前秒针的目的*/
/*分钟处理*/
if(t[0].ti_min!=m){ /*若分钟有变化*/
/*消除当前分针*/
setcolor(15)/*白色*/
x1=80*sin(m/30*PI)+451
y1=200-80*cos(m/30*PI)
line(451,200,x1,y1)
/*绘制新的分针*/
m=t[0].ti_min
digitclock(446,318,digitmin(m))/*在数字时钟中显示新的分钟值*/
x1=80*sin(m/30*PI)+451
y1=200-80*cos(m/30*PI)
line(451,200,x1,y1)
}
/*小时处理*/
if((t[0].ti_hour*60+t[0].ti_min)!=(h*60+m)){ /*若小时数有变化*/
/*消除当前时针*/
setcolor(15)/*白色*/
x=50*sin((h*60+m)/360*PI)+451/*50:时钟的长度（单位：像素），451:圆心的x坐标值*/
y=200-50*cos((h*60+m)/360*PI)
line(451,200,x,y)
/*绘制新的时针*/
h=t[0].ti_hour
digitclock(408,318,digithour(h))
x=50*sin((h*60+m)/360*PI)+451
y=200-50*cos((h*60+m)/360*PI)
line(451,200,x,y)
}
}
}
int keyhandle(int key,int count) /*键盘控制 */
{ switch(key)
{case UP: timeupchange(count-1)/*因为count的初始值为2，所以此处减1*/
break
case DOWN:timedownchange(count-1)/*因为count的初始值为2，所以此处减1*/
break
case TAB:setcolor(15)
clearcursor(count)/*清除原来的光标*/
drawcursor(count) /*显示一个新的光标*/
count++
break
}
return count
}
int timeupchange(int count) /*处理光标上移的按键*/
{
if(count==1){
t[0].ti_hour++
if(t[0].ti_hour==24) t[0].ti_hour=0
settime(t)/*设置新的系统时间*/
}
if(count==2){
t[0].ti_min++
if(t[0].ti_min==60) t[0].ti_min=0
settime(t)/*设置新的系统时间*/
}
if(count==3){
t[0].ti_sec++
if(t[0].ti_sec==60) t[0].ti_sec=0
settime(t)/*设置新的系统时间*/
}
}
int timedownchange(int count) /*处理光标下移的按键*/
{
if(count==1) {
t[0].ti_hour--
if(t[0].ti_hour==0) t[0].ti_hour=23
settime(t)/*设置新的系统时间*/
}
if(count==2) {
t[0].ti_min--
if(t[0].ti_min==0) t[0].ti_min=59
settime(t)/*设置新的系统时间*/
}
if(count==3) {
t[0].ti_sec--
if(t[0].ti_sec==0) t[0].ti_sec=59
settime(t)/*设置新的系统时间*/
}
}
int digithour(double h)/*将double型的小时数转换成int型*/
{int i
for(i=0i<=23i++)
}
int digitmin(double m)/*将double型的分钟数转换成int型*/
{int i
for(i=0i<=59i++)
}
int digitsec(double s) /*将double型的秒钟数转换成int型*/
{int i
for(i=0i<=59i++)
}
void digitclock(int x,int y,int clock)/*在指定位置显示数字时钟:时\分\秒*/
{char buffer1[10]
setfillstyle(0,2)
bar(x,y,x+15,328)
if(clock==60) clock=0
sprintf(buffer1,"%d",clock)
outtextxy(x,y,buffer1)
}
void drawcursor(int count)/*根据count的值，画一个光标*/
{switch(count)
{
case 1:line(424,315,424,325)break
case 2:line(465,315,465,325)break
case 3:line(505,315,505,325)break
}
}
void clearcursor(int count)/*根据count的值，清除前一个光标*/
{switch(count)
{
case 2:line(424,315,424,325)break
case 3:line(465,315,465,325)break
case 1:line(505,315,505,325)break
}
}
顶层文件 万年历.C #include<reg51.h>#include "LCD1602.h" #include "DS1302.h" #define uchar unsigned char #define uint unsigned int sbit speaker=P2^4bit key_flag1=0,key_flag2=0SYSTEMTIME adjusteduchar sec_add=0,min_add=0,hou_add=0,day_add=0,mon_add=0,yea_add=0uchar data_alarm[7]={0}/************键盘控明辩制******************************/ int key_scan() //扫描是否有键按下 { int i=0uint tempP1=0xf0temp=P1if(temp!=0xf0) i=1else i=0return i} uchar key_value() //激晌缺确定按键的值 { uint m=0,n=0,tempuchar valueuchar v[4][3]={'2','1','0','5','4','3','8','7','6','b'谨银,'a','9'} P1=0xfetemp=P1if(temp!=0xfe)m=0P1=0xfdtemp=P1 if(temp!=0xfd)m=1P1=0xfbtemp=P1 if(temp!=0xfb)m=2P1=0xf7temp=P1 if(temp!=0xf7)m=3P1=0xeftemp=P1 if(temp!=0xef)n=0P1=0xdftemp=P1 if(temp!=0xdf)n=1P1=0xbftemp=P1 if(temp!=0xbf)n=2value=v[m][n]return value} /***************************设置闹铃函数*******************************/ void naoling(void) { uchar i=0,l=0,jinit1602()while(key_flag2&&i<12) if(key_scan()){j=key_value()write_data(j)if(i%2==0)data_alarm[l]=(j-'0')*10else {data_alarm[l]+=(j-'0')l++}i++delay(600)} write_com(0x01)} uchar according(void) { uchar kif(data_alarm[0]==adjusted.Year&&data_alarm[1]==adjusted.Month&&data_alarm[2]==adjusted.Day&&data_alarm[3]==adjusted.Hour&&data_alarm[4]==adjusted.Minute&&data_alarm[5]==adjusted.Second) k=1else k=0return k} void speak(void) {uint i=50while(i) {speaker=0delay(1)speaker=1delay(1)i--} } void alarm(void) {uint i=10while(i) { speak()delay(10)i--} } /**************************修改时间 *** 作********************************/ void reset(void) { sec_add=0min_add=0hou_add=0day_add=0mon_add=0yea_add=0 } void adjust(void) { if(key_scan()&&key_flag1) switch(key_value()) {case '0':sec_add++breakcase '1':min_add++breakcase '2':hou_add++breakcase '3':day_add++breakcase '4':mon_add++breakcase '5':yea_add++breakcase 'b':reset()breakdefault: break} adjusted.Second+=sec_addadjusted.Minute+=min_addadjusted.Hour+=hou_addadjusted.Day+=day_addadjusted.Month+=mon_addadjusted.Year+=yea_addif(adjusted.Second>59) adjusted.Second=adjusted.Second%60if(adjusted.Minute>59) adjusted.Minute=adjusted.Minute%60if(adjusted.Hour>23) adjusted.Hour=adjusted.Hour%24if(adjusted.Day>31) adjusted.Day=adjusted.Day%31if(adjusted.Month>12) adjusted.Month=adjusted.Month%12if(adjusted.Year>100) adjusted.Year=adjusted.Year%100} /**************************中断处理函数*********************************/ void changing(void) interrupt 0 using 0 //需要修改时间和日期，或者停止修改 { if(key_flag1)key_flag1=0else key_flag1=1} void alarming(void) interrupt 3 using 0 //需要设置闹铃或者停止设置 { if(key_flag2)key_flag2=0else key_flag2=1} /********************************主函数***********************************/ main() {uint iuchar *luchar p1[]="D:",p2[]="T:"SYSTEMTIME TEA=1EX0=1IT0=1EA=1EX1=1IT1=1init1602()Initial_DS1302() while(1) { write_com(0x80)write_string(p1,2)write_com(0xc0)write_string(p2,2)DS1302_GetTime(&T) adjusted.Second=T.Secondadjusted.Minute=T.Minuteadjusted.Hour=T.Houradjusted.Week=T.Weekadjusted.Day=T.Dayadjusted.Month=T.Monthadjusted.Year=T.Yearfor(i=0i<9i++) { adjusted.DateString[i]=T.DateString[i]adjusted.TimeString[i]=T.TimeString[i]} adjust()if(key_flag2)naoling()if(according())alarm()DateToStr(&adjusted)TimeToStr(&adjusted)write_com(0x82)write_string(adjusted.DateString,8)write_com(0xc2)write_string(adjusted.TimeString,8)delay(10)} （二）头文件1 显示模块 LCD1602.H #ifndef LCD_CHAR_1602_2009_5_9 #define LCD_CHAR_1602_2009_5_9 #define uchar unsigned char #define uint unsigned int sbit lcdrs = P2^0sbit lcdrw = P2^1sbit lcden = P2^2void delay(uint z) // 延时 { uint x,yfor(x=zx>0x--) for(y=110y>0y--)} void write_com(uchar com) // 写入指令数据到 lcd { lcdrw=0lcdrs=0P0=comdelay(5)lcden=1delay(5)lcden=0} void write_data(uchar date) // 写入字符显示数据到 lcd { lcdrw=0lcdrs=1P0=datedelay(5)lcden=1delay(5)lcden=0} void init1602() // 初始化设定 { lcdrw=0lcden=0write_com(0x3C)write_com(0x0c)write_com(0x06)write_com(0x01)write_com(0x80)} void write_string(uchar *pp,uint n) { int ifor(i=0i<ni++) write_data(pp[i])} #endif (三)头文件2 时钟模块 DS1302.H #ifndef _REAL_TIMER_DS1302_2009_5_20_ #define _REAL_TIMER_DS1302_2003_5_20_ sbit DS1302_CLK = P2^6//实时时钟时钟线引脚 sbit DS1302_IO = P2^7//实时时钟数据线引脚 sbit DS1302_RST = P2^5//实时时钟复位线引脚 sbit ACC0 = ACC^0sbit ACC7 = ACC^7typedef struct SYSTEM_TIME { unsigned char Secondunsigned char Minuteunsigned char Hourunsigned char Weekunsigned char Dayunsigned char Monthunsigned char Yearunsigned char DateString[9]//用这两个字符串来放置读取的时间 unsigned char TimeString[9]}SYSTEMTIME//定义的时间类型 #define AM(X) X #define PM(X) (X+12) // 转成24小时制 #define DS1302_SECOND 0x80 #define DS1302_MINUTE 0x82 #define DS1302_HOUR 0x84 #define DS1302_WEEK 0x8A #define DS1302_DAY 0x86 #define DS1302_MONTH 0x88 #define DS1302_YEAR 0x8C #define DS1302_RAM(X) (0xC0+(X)*2) //用于计算 DS1302_RAM 地址的宏 /******内部指令**********/ void DS1302InputByte(unsigned char d) //实时时钟写入一字节(内部函数) { unsigned char iACC = dfor(i=8i>0i--) { DS1302_IO = ACC0DS1302_CLK = 1DS1302_CLK = 0ACC = ACC >>1//因为在前面已经定义了ACC0 = ACC^0以便再次利用DS1302_IO = ACC0} } unsigned char DS1302OutputByte(void) //实时时钟读取一字节(内部函数) { unsigned char ifor(i=8i>0i--) { ACC = ACC >>1ACC7 = DS1302_IODS1302_CLK = 1DS1302_CLK = 0} return(ACC)} /********************************/ void Write1302(unsigned char ucAddr, unsigned char ucDa) //ucAddr: DS1302地址, ucData: 要写的数据 { DS1302_RST = 0DS1302_CLK = 0DS1302_RST = 1DS1302InputByte(ucAddr)// 地址，命令 DS1302InputByte(ucDa)// 写1Byte数据 DS1302_CLK = 1DS1302_RST = 0} unsigned char Read1302(unsigned char ucAddr) //读取DS1302某地址的数据 { unsigned char ucDataDS1302_RST = 0DS1302_CLK = 0DS1302_RST = 1DS1302InputByte(ucAddr|0x01)// 地址，命令 ucData = DS1302OutputByte()// 读1Byte数据 DS1302_CLK = 1DS1302_RST = 0return(ucData)} void DS1302_SetProtect(bit flag) //是否写保护 { if(flag) Write1302(0x8E,0x10)else Write1302(0x8E,0x00)} void DS1302_SetTime(unsigned char Address, unsigned char Value) // 设置时间函数 { DS1302_SetProtect(0)Write1302(Address, ((Value/10)<<4 | (Value%10)))//将十进制数转换为BCD码 } //在DS1302中的与日历、时钟相关的寄存器存放的数据必须为BCD码形式 void DS1302_GetTime(SYSTEMTIME *Time) { unsigned char ReadValueReadValue = Read1302(DS1302_SECOND)Time->Second = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F)//将BCD码转换为十进制数 ReadValue = Read1302(DS1302_MINUTE)Time->Minute = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F)ReadValue = Read1302(DS1302_HOUR)Time->Hour = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F)ReadValue = Read1302(DS1302_DAY)Time->Day = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F)ReadValue = Read1302(DS1302_WEEK)Time->Week = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F)ReadValue = Read1302(DS1302_MONTH)Time->Month = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F)ReadValue = Read1302(DS1302_YEAR)Time->Year = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F)} unsigned char *DataToBCD(SYSTEMTIME *Time) { unsigned char D[8]D[0]=Time->Second/10<<4+Time->Second%10D[1]=Time->Minute/10<<4+Time->Minute%10D[2]=Time->Hour/10<<4+Time->Hour%10D[3]=Time->Day/10<<4+Time->Day%10D[4]=Time->Month/10<<4+Time->Month%10D[5]=Time->Week/10<<4+Time->Week%10D[6]=Time->Year/10<<4+Time->Year%10return D} void DateToStr(SYSTEMTIME *Time) { //将十进制数转换为液晶显示的ASCII值 Time->DateString[0] = Time->Year/10 + '0'Time->DateString[1] = Time->Year%10 + '0'Time->DateString[2] = '-'Time->DateString[3] = Time->Month/10 + '0'Time->DateString[4] = Time->Month%10 + '0'Time->DateString[5] = '-'Time->DateString[6] = Time->Day/10 + '0'Time->DateString[7] = Time->Day%10 + '0'Time->DateString[8] = '\0'} void TimeToStr(SYSTEMTIME *Time) { //将十进制数转换为液晶显示的ASCII值 Time->TimeString[0] = Time->Hour/10 + '0'Time->TimeString[1] = Time->Hour%10 + '0'Time->TimeString[2] = ':'Time->TimeString[3] = Time->Minute/10 + '0'Time->TimeString[4] = Time->Minute%10 + '0'Time->TimeString[5] = ':'Time->TimeString[6] = Time->Second/10 + '0'Time->TimeString[7] = Time->Second%10 + '0'Time->DateString[8] = '\0'} void Initial_DS1302(void) { unsigned char SecondSecond=Read1302(DS1302_SECOND)if(Second&0x80) //初始化时间 DS1302_SetTime(DS1302_SECOND,0)} void DS1302_TimeStop(bit flag) // 是否将时钟停止 { unsigned char DataData=Read1302(DS1302_SECOND)DS1302_SetProtect(0)if(flag) Write1302(DS1302_SECOND, Data|0x80)else Write1302(DS1302_SECOND, Data&0x7F)} #endifzftzbpujjj1134358763，jaiezwwysu6517560870，2012-2-15 11:08:28
#include<reg52.h>
#define uchar unsigned char
#define uint unsigned int
uchar code table[]="I LIKE MCU!"
uchar code table1[]="www.TXMCU.COM"
sbit lcden=P3^4
sbit lcdrs=P3^5
sbit dula=P2^6
sbit wela=P2^7
uchar num
void delay(uint z)
{
uint x,y
for(x=zx>0x--)
for(y=110y>0y--)
}
void write_com(uchar com)
{
lcdrs=0
P0=com
delay(5)
lcden=1
delay(5)
lcden=0
}
void write_data(uchar date)
{
lcdrs=1
P0=date
delay(5)
lcden=1
delay(5)
lcden=0
}
void init()
{
dula=0
wela=0
lcden=0
write_com(0x38)
write_com(0x0e)
write_com(0x06)
write_com(0x01)
write_com(0x80+0x10)
}
void main()
{
init()
for(num=0num<11num++)
{
write_data(table[num])
delay(20)
}
// write_com(1)
write_com(0x80+0x53)
for(num=0num<13num++)
{
write_data(table1[num])
delay(20)
}
for(num=0num<16num++)
{
write_com(0x18)
delay(20)
}
while(1)
}
欢迎分享，转载请注明来源：内存溢出
微信扫一扫
支付宝扫一扫
评论列表（0条）