modprobe 8021q
vconfig add eth0 10
ifconfig eth0.10 192.168.1.2 up
ping 192.168.1.1 -I eth0.10
抓包就可以了:
# tcpdump -i eth0 -e -n arp or icmp
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
11:15:48.189723 3c:97:0e:57:8c:e1 >ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 46: vlan 10, p 0, ethertype ARP, Request who-has 192.168.1.1 tell 192.168.1.2, length 28
是驱动器问题。可能为BIOSME固件_失引起,Intel网卡如果ME丢失或有问题,可能会开机出现code10,需禁用再启用才能使用网卡。可以把文件复制到开机启动文件夹,也可开启计划任务,注意使用管理员权限。
建议联系惠普金牌服务中心查看维护硬件,您可以通过以下网址查询距离最近的惠普金牌服务中心:维修中心具体时间安排建议致电询问确认,若周末电话无法接通,建议周一到周五致电联系。
欢迎分享,转载请注明来源:内存溢出
评论列表(0条)