*-pci:0
description: PCI bridge
product: Intel Corporation
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 35
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:16 ioport:1000(size=4096) memory:91100000-911fffff
*-network DISABLED
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: enp1s0
version: 15
serial: 30:65:ec:a3:e2:f3
size: 10Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s
resources: irq:308 ioport:1000(size=256) memory:91104000-91104fff memory:91100000-91103fff
*-pci:1
description: PCI bridge
product: Intel Corporation
vendor: Intel Corporation
physical id: 1c.1
bus info: pci@0000:00:1c.1
version: 35
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:17 memory:91000000-910fffff
*-network
description: Wireless interface
product: QCA9565 / AR9565 Wireless Network Adapter
vendor: Qualcomm Atheros
physical id: 0
bus info: pci@0000:02:00.0
logical name: wlp2s0
version: 01
serial: c8:ff:28:48:04:ed
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless
configuration: broadcast=yes driver=ath9k driverversion=4.4.0-51-generic firmware=N/A ip=192.168.43.133 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn
resources: irq:17 memory:91000000-9107ffff memory:91080000-9108ffff
这个片段中我们可用看到我的电脑有两个PCI总线(PCI:0和PCI:1),其中“clock: 33MHz”表明总线频率位33兆。
无线网卡Qualcomm Atheros QCA9565/AR9565驱动可通过以下步骤进行安装:1、将无线网卡插入Qualcomm电脑,双击打开“计算机”,双击光驱;2、双击之后d出一个页面,选择“安装驱动程序”,选择购买型号网卡的驱动,先选定,再点安装;3、在无线上网卡官网下载相对应型号无线网卡进行安装驱动,下载完成后进行解压;4、打开解压出来的文件找到“Setup.exe”,双击完成安装后,重启电脑即可完成。5、温馨提醒:USB无线网卡要连接到笔记本或者台式机上 ,安装驱动完成后建议重启一下Qualcomm电脑。欢迎分享,转载请注明来源:内存溢出
评论列表(0条)