因为单纯形matlab是综合类的工程数学软件，利用其语言和自带命令可以方便地编写处理各种问题的程序包，自带的工具箱涵盖的范围也很丰富。
程序（Program）是计算机系统的必备元素，因为计算机系统由硬件、 *** 作系统以及软件构成，而程序又是软件的组成部分。
matlab自己就有啊！它是Nelder-Mead法或称下山单纯形法，由Nelder和Mead发现（1965年）http://zhidao.baidu.com/question/18274859.html
>>type fminsearch
function [x,fval,exitflag,output] = fminsearch(funfcn,x,options,varargin)
%FMINSEARCH Multidimensional unconstrained nonlinear minimization (Nelder-Mead).
% X = FMINSEARCH(FUN,X0) starts at X0 and attempts to find a local minimizer
% X of the function FUN. FUN is a function handle. FUN accepts input X and
% returns a scalar function value F evaluated at X. X0 can be a scalar, vector
% or matrix.
%
% X = FMINSEARCH(FUN,X0,OPTIONS) minimizes with the default optimization
% parameters replaced by values in the structure OPTIONS, created
% with the OPTIMSET function. See OPTIMSET for details. FMINSEARCH uses
% these options: Display, TolX, TolFun, MaxFunEvals, MaxIter, FunValCheck,
% PlotFcns, and OutputFcn.
%
% X = FMINSEARCH(PROBLEM) finds the minimum for PROBLEM. PROBLEM is a
% structure with the function FUN in PROBLEM.objective, the start point
% in PROBLEM.x0, the options structure in PROBLEM.options, and solver
% name 'fminsearch' in PROBLEM.solver. The PROBLEM structure must have
% all the fields.
%
% [X,FVAL]= FMINSEARCH(...) returns the value of the objective function,
% described in FUN, at X.
%
% [X,FVAL,EXITFLAG] = FMINSEARCH(...) returns an EXITFLAG that describes
% the exit condition of FMINSEARCH. Possible values of EXITFLAG and the
% corresponding exit conditions are
%
%1 Maximum coordinate difference between current best point and other
% points in simplex is less than or equal to TolX, and corresponding
% difference in function values is less than or equal to TolFun.
%0 Maximum number of function evaluations or iterations reached.
% -1 Algorithm terminated by the output function.
%
% [X,FVAL,EXITFLAG,OUTPUT] = FMINSEARCH(...) returns a structure
% OUTPUT with the number of iterations taken in OUTPUT.iterations, the
% number of function evaluations in OUTPUT.funcCount, the algorithm name
% in OUTPUT.algorithm, and the exit message in OUTPUT.message.
%
% Examples
% FUN can be specified using @:
%X = fminsearch(@sin,3)
% finds a minimum of the SIN function near 3.
% In this case, SIN is a function that returns a scalar function value
% SIN evaluated at X.
%
% FUN can also be an anonymous function:
%X = fminsearch(@(x) norm(x),[123])
% returns a point near the minimizer [000].
%
% If FUN is parameterized, you can use anonymous functions to capture the
% problem-dependent parameters. Suppose you want to optimize the objective
% given in the function myfun, which is parameterized by its second argument c.
% Here myfun is an M-file function such as
%
% function f = myfun(x,c)
% f = x(1)^2 + c*x(2)^2
%
% To optimize for a specific value of c, first assign the value to c. Then
% create a one-argument anonymous function that captures that value of c
% and calls myfun with two arguments. Finally, pass this anonymous function
% to FMINSEARCH:
%
% c = 1.5% define parameter first
% x = fminsearch(@(x) myfun(x,c),[0.31])
%
% FMINSEARCH uses the Nelder-Mead simplex (direct search) method.
%
% See also OPTIMSET, FMINBND, FUNCTION_HANDLE.
% Reference: Jeffrey C. Lagarias, James A. Reeds, Margaret H. Wright,
% Paul E. Wright, "Convergence Properties of the Nelder-Mead Simplex
% Method in Low Dimensions", SIAM Journal of Optimization, 9(1):
% p.112-147, 1998.
% Copyright 1984-2006 The MathWorks, Inc.
% $Revision: 1.21.4.12.2.1 $ $Date: 2006/07/16 15:34:18 $
defaultopt = struct('Display','notify','MaxIter','200*numberOfVariables',...
'MaxFunEvals','200*numberOfVariables','TolX',1e-4,'TolFun',1e-4, ...
'FunValCheck','off','OutputFcn',[],'PlotFcns',[])
% If just 'defaults' passed in, return the default options in X
if nargin==1 &&nargout <= 1 &&isequal(funfcn,'defaults')
x = defaultopt
return
end
if nargin<3, options = []end
% Detect problem structure input
if nargin == 1
if isa(funfcn,'struct')
[funfcn,x,options] = separateOptimStruct(funfcn)
else % Single input and non-structure
error('MATLAB:fminsearch:InputArg','The input to FMINSEARCH should be either a structure with valid fields or consist of at least two arguments.')
end
end
if nargin == 0
error('MATLAB:fminsearch:NotEnoughInputs',...
'FMINSEARCH requires at least two input arguments')
end
% Check for non-double inputs
if ~isa(x,'double')
error('MATLAB:fminsearch:NonDoubleInput', ...
'FMINSEARCH only accepts inputs of data type double.')
end
n = numel(x)
numberOfVariables = n
printtype = optimget(options,'Display',defaultopt,'fast')
tolx = optimget(options,'TolX',defaultopt,'fast')
tolf = optimget(options,'TolFun',defaultopt,'fast')
maxfun = optimget(options,'MaxFunEvals',defaultopt,'fast')
maxiter = optimget(options,'MaxIter',defaultopt,'fast')
funValCheck = strcmp(optimget(options,'FunValCheck',defaultopt,'fast'),'on')
% In case the defaults were gathered from calling: optimset('fminsearch'):
if ischar(maxfun)
if isequal(lower(maxfun),'200*numberofvariables')
maxfun = 200*numberOfVariables
else
error('MATLAB:fminsearch:OptMaxFunEvalsNotInteger',...
'Option ''MaxFunEvals'' must be an integer value if not the default.')
end
end
if ischar(maxiter)
if isequal(lower(maxiter),'200*numberofvariables')
maxiter = 200*numberOfVariables
else
error('MATLAB:fminsearch:OptMaxIterNotInteger',...
'Option ''MaxIter'' must be an integer value if not the default.')
end
end
switch printtype
case 'notify'
prnt = 1
case {'none','off'}
prnt = 0
case 'iter'
prnt = 3
case 'final'
prnt = 2
case 'simplex'
prnt = 4
otherwise
prnt = 1
end
% Handle the output
outputfcn = optimget(options,'OutputFcn',defaultopt,'fast')
if isempty(outputfcn)
haveoutputfcn = false
else
haveoutputfcn = true
xOutputfcn = x% Last x passed to outputfcnhas the input x's shape
% Parse OutputFcn which is needed to support cell array syntax for OutputFcn.
outputfcn = createCellArrayOfFunctions(outputfcn,'OutputFcn')
end
% Handle the plot
plotfcns = optimget(options,'PlotFcns',defaultopt,'fast')
if isempty(plotfcns)
haveplotfcn = false
else
haveplotfcn = true
xOutputfcn = x% Last x passed to plotfcnshas the input x's shape
% Parse PlotFcns which is needed to support cell array syntax for PlotFcns.
plotfcns = createCellArrayOfFunctions(plotfcns,'PlotFcns')
end
header = ' Iteration Func-count min f(x) Procedure'
% Convert to function handle as needed.
funfcn = fcnchk(funfcn,length(varargin))
% Add a wrapper function to check for Inf/NaN/complex values
if funValCheck
% Add a wrapper function, CHECKFUN, to check for NaN/complex values without
% having to change the calls that look like this:
% f = funfcn(x,varargin{:})
% x is the first argument to CHECKFUN, then the user's function,
% then the elements of varargin. To accomplish this we need to add the
% user's function to the beginning of varargin, and change funfcn to be
% CHECKFUN.
varargin = {funfcn, varargin{:}}
funfcn = @checkfun
end
n = numel(x)
% Initialize parameters
rho = 1chi = 2psi = 0.5sigma = 0.5
onesn = ones(1,n)
two2np1 = 2:n+1
one2n = 1:n
% Set up a simplex near the initial guess.
xin = x(:)% Force xin to be a column vector
v = zeros(n,n+1)fv = zeros(1,n+1)
v(:,1) = xin % Place input guess in the simplex! (credit L.Pfeffer at Stanford)
x(:) = xin % Change x to the form expected by funfcn
fv(:,1) = funfcn(x,varargin{:})
func_evals = 1
itercount = 0
how = ''
% Initial simplex setup continues later
% Initialize the output and plot functions.
if haveoutputfcn || haveplotfcn
[xOutputfcn, optimValues, stop] = callOutputAndPlotFcns(outputfcn,plotfcns,v(:,1),xOutputfcn,'init',itercount, ...
func_evals, how, fv(:,1),varargin{:})
if stop
[x,fval,exitflag,output] = cleanUpInterrupt(xOutputfcn,optimValues)
if prnt >0
disp(output.message)
end
return
end
end
% Print out initial f(x) as 0th iteration
if prnt == 3
disp(' ')
disp(header)
disp(sprintf(' %5.0f%5.0f %12.6g %s', itercount, func_evals, fv(1), how))
elseif prnt == 4
clc
formatsave = get(0,{'format','formatspacing'})
format compact
format short e
disp(' ')
disp(how)
v
fv
func_evals
end
% OutputFcn and PlotFcns call
if haveoutputfcn || haveplotfcn
[xOutputfcn, optimValues, stop] = callOutputAndPlotFcns(outputfcn,plotfcns,v(:,1),xOutputfcn,'iter',itercount, ...
func_evals, how, fv(:,1),varargin{:})
if stop % Stop per user request.
[x,fval,exitflag,output] = cleanUpInterrupt(xOutputfcn,optimValues)
if prnt >0
disp(output.message)
end
return
end
end
% Continue setting up the initial simplex.
% Following improvement suggested by L.Pfeffer at Stanford
usual_delta = 0.05% 5 percent deltas for non-zero terms
zero_term_delta = 0.00025 % Even smaller delta for zero elements of x
for j = 1:n
y = xin
if y(j) ~= 0
y(j) = (1 + usual_delta)*y(j)
else
y(j) = zero_term_delta
end
v(:,j+1) = y
x(:) = yf = funfcn(x,varargin{:})
fv(1,j+1) = f
end
% sort so v(1,:) has the lowest function value
[fv,j] = sort(fv)
v = v(:,j)
how = 'initial simplex'
itercount = itercount + 1
func_evals = n+1
if prnt == 3
disp(sprintf(' %5.0f%5.0f %12.6g %s', itercount, func_evals, fv(1), how))
elseif prnt == 4
disp(' ')
disp(how)
v
fv
func_evals
end
% OutputFcn and PlotFcns call
if haveoutputfcn || haveplotfcn
[xOutputfcn, optimValues, stop] = callOutputAndPlotFcns(outputfcn,plotfcns,v(:,1),xOutputfcn,'iter',itercount, ...
func_evals, how, fv(:,1),varargin{:})
if stop % Stop per user request.
[x,fval,exitflag,output] = cleanUpInterrupt(xOutputfcn,optimValues)
if prnt >0
disp(output.message)
end
return
end
end
exitflag = 1
% Main algorithm: iterate until
% (a) the maximum coordinate difference between the current best point and the
% other points in the simplex is less than or equal to TolX. Specifically,
% until max(||v2-v1||,||v2-v1||,...,||v(n+1)-v1||) <= TolX,
% where ||.|| is the infinity-norm, and v1 holds the
% vertex with the current lowest valueAND
% (b) the corresponding difference in function values is less than or equal
% to TolFun. (Cannot use OR instead of AND.)
% The iteration stops if the maximum number of iterations or function evaluations
% are exceeded
while func_evals <maxfun &&itercount <maxiter
if max(abs(fv(1)-fv(two2np1))) <= tolf &&...
max(max(abs(v(:,two2np1)-v(:,onesn)))) <= tolx
break
end
% Compute the reflection point
% xbar = average of the n (NOT n+1) best points
xbar = sum(v(:,one2n), 2)/n
xr = (1 + rho)*xbar - rho*v(:,end)
x(:) = xrfxr = funfcn(x,varargin{:})
func_evals = func_evals+1
if fxr <fv(:,1)
% Calculate the expansion point
xe = (1 + rho*chi)*xbar - rho*chi*v(:,end)
x(:) = xefxe = funfcn(x,varargin{:})
func_evals = func_evals+1
if fxe <fxr
v(:,end) = xe
fv(:,end) = fxe
how = 'expand'
else
v(:,end) = xr
fv(:,end) = fxr
how = 'reflect'
end
else % fv(:,1) <= fxr
if fxr <fv(:,n)
v(:,end) = xr
fv(:,end) = fxr
how = 'reflect'
else % fxr >= fv(:,n)
% Perform contraction
if fxr <fv(:,end)
% Perform an outside contraction
xc = (1 + psi*rho)*xbar - psi*rho*v(:,end)
x(:) = xcfxc = funfcn(x,varargin{:})
func_evals = func_evals+1
if fxc <= fxr
v(:,end) = xc
fv(:,end) = fxc
how = 'contract outside'
else
% perform a shrink
how = 'shrink'
end
else
% Perform an inside contraction
xcc = (1-psi)*xbar + psi*v(:,end)
x(:) = xccfxcc = funfcn(x,varargin{:})
func_evals = func_evals+1
if fxcc <fv(:,end)
v(:,end) = xcc
fv(:,end) = fxcc
how = 'contract inside'
else
% perform a shrink
how = 'shrink'
end
end
if strcmp(how,'shrink')
for j=two2np1
v(:,j)=v(:,1)+sigma*(v(:,j) - v(:,1))
x(:) = v(:,j)fv(:,j) = funfcn(x,varargin{:})
end
func_evals = func_evals + n
end
end
end
[fv,j] = sort(fv)
v = v(:,j)
itercount = itercount + 1
if prnt == 3
disp(sprintf(' %5.0f%5.0f %12.6g %s', itercount, func_evals, fv(1), how))
elseif prnt == 4
disp(' ')
disp(how)
v
fv
func_evals
end
% OutputFcn and PlotFcns call
if haveoutputfcn || haveplotfcn
[xOutputfcn, optimValues, stop] = callOutputAndPlotFcns(outputfcn,plotfcns,v(:,1),xOutputfcn,'iter',itercount, ...
func_evals, how, fv(:,1),varargin{:})
if stop % Stop per user request.
[x,fval,exitflag,output] = cleanUpInterrupt(xOutputfcn,optimValues)
if prnt >0
disp(output.message)
end
return
end
end
end % while
x(:) = v(:,1)
fval = fv(:,1)
if prnt == 4,
% reset format
set(0,{'format','formatspacing'},formatsave)
end
output.iterations = itercount
output.funcCount = func_evals
output.algorithm = 'Nelder-Mead simplex direct search'
% OutputFcn and PlotFcns call
if haveoutputfcn || haveplotfcn
callOutputAndPlotFcns(outputfcn,plotfcns,x,xOutputfcn,'done',itercount, func_evals, how, fval, varargin{:})
end
if func_evals >= maxfun
msg = sprintf(['Exiting: Maximum number of function evaluations has been exceeded\n' ...
' - increase MaxFunEvals option.\n' ...
' Current function value: %f \n'], fval)
if prnt >0
disp(' ')
disp(msg)
end
exitflag = 0
elseif itercount >= maxiter
msg = sprintf(['Exiting: Maximum number of iterations has been exceeded\n' ...
' - increase MaxIter option.\n' ...
' Current function value: %f \n'], fval)
if prnt >0
disp(' ')
disp(msg)
end
exitflag = 0
else
msg = ...
sprintf(['Optimization terminated:\n', ...
' the current x satisfies the termination criteria using OPTIONS.TolX of %e \n' ...
' and F(X) satisfies the convergence criteria using OPTIONS.TolFun of %e \n'], ...
tolx, tolf)
if prnt >1
disp(' ')
disp(msg)
end
exitflag = 1
end
output.message = msg
%--------------------------------------------------------------------------
function [xOutputfcn, optimValues, stop] = callOutputAndPlotFcns(outputfcn,plotfcns,x,xOutputfcn,state,iter,...
numf,how,f,varargin)
% CALLOUTPUTANDPLOTFCNS assigns values to the struct OptimValues and then calls the
% outputfcn/plotfcns.
%
% state - can have the values 'init','iter', or 'done'.
% For the 'done' state we do not check the value of 'stop' because the
% optimization is already done.
optimValues.iteration = iter
optimValues.funccount = numf
optimValues.fval = f
optimValues.procedure = how
xOutputfcn(:) = x % Set x to have user expected size
% Call output functions
if ~isempty(outputfcn)
switch state
case {'iter','init'}
stop = callAllOptimOutputFcns(outputfcn,xOutputfcn,optimValues,state,varargin{:})
case 'done'
stop = false
callAllOptimOutputFcns(outputfcn,xOutputfcn,optimValues,state,varargin{:})
otherwise
error('MATLAB:fminsearch:InvalidState', ...
'Unknown state in CALLOUTPUTANDPLOTFCNS.')
end
end
% Call plot functions
if ~isempty(plotfcns)
switch state
case {'iter','init'}
stop = callAllOptimPlotFcns(plotfcns,xOutputfcn,optimValues,state,varargin{:})
case 'done'
stop = false
callAllOptimPlotFcns(plotfcns,xOutputfcn,optimValues,state,varargin{:})
otherwise
error('MATLAB:fminsearch:InvalidState', ...
'Unknown state in CALLOUTPUTANDPLOTFCNS.')
end
end
%--------------------------------------------------------------------------
function [x,FVAL,EXITFLAG,OUTPUT] = cleanUpInterrupt(xOutputfcn,optimValues)
% CLEANUPINTERRUPT updates or sets all the output arguments of FMINBND when the optimization
% is interrupted.
x = xOutputfcn
FVAL = optimValues.fval
EXITFLAG = -1
OUTPUT.iterations = optimValues.iteration
OUTPUT.funcCount = optimValues.funccount
OUTPUT.algorithm = 'golden section search, parabolic interpolation'
OUTPUT.message = 'Optimization terminated prematurely by user.'
%--------------------------------------------------------------------------
function f = checkfun(x,userfcn,varargin)
% CHECKFUN checks for complex or NaN results from userfcn.
f = userfcn(x,varargin{:})
% Note: we do not check for Inf as FMINSEARCH handles it naturally.
if isnan(f)
error('MATLAB:fminsearch:checkfun:NaNFval', ...
'User function ''%s'' returned NaN when evaluated\n FMINSEARCH cannot continue.', ...
localChar(userfcn))
elseif ~isreal(f)
error('MATLAB:fminsearch:checkfun:ComplexFval', ...
'User function ''%s'' returned a complex value when evaluated\n FMINSEARCH cannot continue.', ...
localChar(userfcn))
end
%--------------------------------------------------------------------------
function strfcn = localChar(fcn)
% Convert the fcn to a string for printing
if ischar(fcn)
strfcn = fcn
elseif isa(fcn,'inline')
strfcn = char(fcn)
elseif isa(fcn,'function_handle')
strfcn = func2str(fcn)
else
try
strfcn = char(fcn)
catch
strfcn = '(name not printable)'
end
end
求解线性规划问题，matlab里统一使用linprog函数，其用法是x = linprog(f,A,b,Aeq,beq,lb,ub)
并且是用来求解最小值的，所以目标函数改为最小值。
这里参数
f=[-40-30-10]
A=[9 7 100.6 1.5 10.6 1.5 -1]
b = [103.25]
lb = zeros(3,1)
[x,fval,exitflag,output,lambda] = linprog(f,A,b,[],[],lb)
=======================
运行结果
x =
1.1111
0.0000
0.0000
欢迎分享，转载请注明来源：内存溢出
微信扫一扫
支付宝扫一扫
评论列表（0条）