cc1101的程序可以用在cc1110

cc1101的程序不可以用在cc1110。C1101是CC1100的升级版，对无线部分进行了优化，改善了杂散响应(spuriousresponse)，输入兼容1100的程序.本身不带MCU，一个纯粹的无线发送芯片，使用SPI控制.可工作范围-40C到80度，这个有待考证，按一半算了也就是-20C-70C应该没问题.本身就是工业级的芯片。还有一点要提的，CC1101的功率比CC1100增大了2DB，达到12DBM，是目前不需要PA就能传的很远的芯片，距离大概在200-300M之间.靠太近会输入饱和，无法收到任何数据。

拉低CSN，然后MISO返回一个低电平，说明复位成功。继续往下执行。如果不能返回，就是芯片有问题了。参见文档：When the CC1101 reset is completed, the chip will be in the IDLE state and the crystaloscillator will be running. If the chip has had sufficient time for the crystal oscillator tostabilize after the power-on-reset, the SO pin will go low immediately after taking CSn low. IfCSn is taken low before reset is completed,the SO pin will first go high, indicating that thecrystal oscillator is not stabilized, before going low as shown in Figure 23.

---