SSD202 驱动4G模块

1 电路相关

echo 0 > /sys/class/gpio/gpio85/value # RESET
sleep 2
echo 1 > /sys/class/gpio/gpio85/value # UNRESET
sleep 2
echo 0 > /sys/class/gpio/gpio86/value # OFF
sleep 2
echo 1 > /sys/class/gpio/gpio86/value # ON
sleep 2

echo 0 > /sys/class/gpio/gpio47/value # SWITCH TO 4G
echo 1 > /sys/class/gpio/gpio47/value # SWITCH TO USB

sleep 2
echo 0 > /sys/class/gpio/gpio90/value # POWER OFF
sleep 2
echo 1 > /sys/class/gpio/gpio90/value # POWER ON

2 步骤

调用：
pppd call air-ppp&
没有天线可能无法生存设备端口
打印：
local IP address 10.92.71.240
remote IP address 192.168.0.1
primary DNS address 202.103.224.68

DNS配置

/etc/resolv.conf 初始为一个链接文件；需要删除。
上面步骤会自动更新他的DNS配置

自动生成下面的一个网络设备：
ppp0 Link encap:Point-to-Point Protocol
inet addr:10.140.83.215 P-t-P:192.168.0.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:70 (70.0 B) TX bytes:86 (86.0 B)

route add default gw 192.168.0.1 ip route add default via 192.168.0.1 ip route

default via 192.168.0.1 dev ppp0
192.168.0.1 dev ppp0 scope link src 10.140.83.215

ping www.baidu.com

ping: bad address ‘www.baidu.com’

ping 163.177.151.110

PING 163.177.151.110 (163.177.151.110): 56 data bytes
64 bytes from 163.177.151.110: seq=0 ttl=51 time=193.922 ms
64 bytes from 163.177.151.110: seq=1 ttl=51 time=49.516 ms
64 bytes from 163.177.151.110: seq=2 ttl=51 time=67.497 ms