shell脚本和拓扑图的互通配置

概述拓扑图实现ip互通 实验环境准备： <Huawei>system-view Enter system view, return user view with Ctrl+Z. [Huawei]sysname R1 [R1]interface GigabitEthernet 0/0/0 [R1-GigabitEthernet0/0/0]ip address 10.0.13.1 24 [R1-Gigab
拓扑图实现ip互通
实验环境准备：
<Huawei>system-vIEw
Enter system vIEw,return user vIEw with Ctrl+Z.
[Huawei]sysname R1
[R1]interface GigabitEthernet 0/0/0
[R1-GigabitEthernet0/0/0]ip address 10.0.13.1 24
[R1-GigabitEthernet0/0/0]quit
[R1]interface LoopBack 0
[R1-LoopBack0]ip address 10.0.1.1 24
[R1-LoopBack0]quit
<Huawei>system-vIEw
Enter system vIEw,return user vIEw with Ctrl+Z.
[Huawei]sysname R2
[R2]interface GigabitEthernet 0/0/1
[R2-GigabitEthernet0/0/1]ip address 10.0.12.2 24
[R2-GigabitEthernet0/0/1]quit
[R2]interface LoopBack 0
[R2-LoopBack0]ip address 10.0.2.2 24
<Huawei>system-vIEw
Enter system vIEw,return user vIEw with Ctrl+Z.
[Huawei]sysname R3
[R3]interface LoopBack 0
[R3-LoopBack0]ip address 10.0.3.3 24
配置 IP 地址 为R2和R3配置如下IP地址。 [R2]interface GigabitEthernet 0/0/0 [R2-GigabitEthernet0/0/0]ip address 10.0.13.2 24 [R3]interface GigabitEthernet0/0/1 [R3-GigabitEthernet0/0/1]ip address 10.0.12.3 24 测试R1与R2间的连通性。 <R1>Ping 10.0.13.2 测试R2与R3间的连通性。 <R2>Ping 10.0.12.3 总结

以上是内存溢出为你收集整理的shell脚本和拓扑图的互通配置全部内容，希望文章能够帮你解决shell脚本和拓扑图的互通配置所遇到的程序开发问题。

如果觉得内存溢出网站内容还不错，欢迎将内存溢出网站推荐给程序员好友。