TDA7498设计的100W+100W D类音频放大技术

TDA7498设计的100W+100W D类音频放大技术,第1张

ST公司的TDA7498是100W+100W双BTL D类音频放大器,主要用在家庭影院和有源扬声器. TDA7498单电源10-39V工作,效率高达90%,增益设定为25.6 dB, 31.6 dB, 35.1 dB和37.6 dB, 在THD = 10%, RL = 6欧姆和VCC = 36 V时的输出功率为100W+100W.本文介绍了TDA7498主要特性, 内部方框图, 特性测量电路图, 6和8欧姆扬声器应用电路图以及待机和静音电路图, 6和8欧姆扬声器LC滤波器电路图.

TDA7498:100 W + 100 W dual BTL class-D audio amplifier.

The TDA7498 is a dual BTL class-D audio amplifier with single power supply designed for home systems and acTIve speaker applicaTIons. It comes in a 36-pin PowerSSO package with exposed pad up (EPU) to facilitate mounTIng a separate heatsink.

TDA7498主要特性:

100 W + 100 W output power at THD = 10% with RL = 6ohm and VCC = 36 V

Wide range single supply operaTIon (10 - 39 V)

High efficiency (= 90%)

Four selectable, fixed gain settings of nominally 25.6 dB, 31.6 dB, 35.1 dB and 37.6 dB

Differential inputs minimize common-mode noise

Standby and mute features

Short-circuit protection

Thermal overload protection

Externally synchronizable

TDA7498设计的100W+100W D类音频放大技术,第2张
图1.TDA7498内部方框图(仅显示一路)
TDA7498设计的100W+100W D类音频放大技术,第3张
图2.TDA7498特性测量电路图
TDA7498设计的100W+100W D类音频放大技术,第4张
图3.TDA7498 6欧姆扬声器应用电路图
TDA7498设计的100W+100W D类音频放大技术,第5张
图4.TDA7498 8欧姆扬声器应用电路图
TDA7498设计的100W+100W D类音频放大技术,第6张
图5.TDA7498 待机和静音电路图
TDA7498设计的100W+100W D类音频放大技术,第7张
图6.TDA7498 8欧姆扬声器LC滤波器电路图
TDA7498设计的100W+100W D类音频放大技术,第8张
图7.TDA7498 6欧姆扬声器LC滤波器电路图
TDA7498设计的100W+100W D类音频放大技术,第9张
图8.TDA7498 主从连接框图

欢迎分享,转载请注明来源:内存溢出

原文地址: http://outofmemory.cn/dianzi/2464415.html

(0)
打赏 微信扫一扫 微信扫一扫 支付宝扫一扫 支付宝扫一扫
上一篇 2022-08-04
下一篇 2022-08-04

发表评论

登录后才能评论

评论列表(0条)

保存