在苹果电脑中怎样往FTP服务器中上传文件

*** 作是很简单的。
第一种方法是用Finder，点击屏幕顶端菜单栏中的Go，在下拉菜单中选择连接到服务器，接着在对话框里输入FTP地址、用户名、密码，登陆后，Finder便会出现FTP的盘符，将你的文件拖进取就可以了，好象使用U盘一样。不过Finder速度比较慢。
第二种方法，使用FTP上传软件，这里推荐Transmit，点击>报错如下：end Kernel panic - not syncing: Out of memory and no killable processes

[ 2113892] [<ffffffff818431b0>] rest_init+0x80/0x80

[    2114902]  [<ffffffff818431be>] kernel_init+0xe/0xe0

[    2115844]  [<ffffffff8184fbf5>] ret_from_fork+0x55/0x80

[    2116847]  [<ffffffff818431b0>] rest_init+0x80/0x80

[    2117945] ---[ end Kernel panic - not syncing: Out of memory and no killable processes

解决方案：

看了下解释翻译过来是：结束内核恐慌-不同步：内存不足，没有可杀死的进程

1直接增加虚拟机的运行内存（不是存储空间）------exsi的虚拟机

2要是ubantu的服务器上的虚拟机可以参考

添加虚拟机swap空间：>ntpd -x -- 这里的这个-x代表加一个参数，x 可以是c, f, k, p, P, r, s, t, U等等中的一个字母。
详细说明，可以看一下ntpd的man page 如：
-bash-300$ man ntpd
Reformatting page Please Wait done
System Administration Commands ntpd(1M)
NAME
ntpd - Network Time Protocol daemon Version 4
SYNOPSIS
/usr/lib/inet/ntpd [-46aAbdDgLmnNqvx] [-c conffile]
[-f driftfile] [-k keyfile] [-l logfile] [-p pidfile]
[-P priority] [-r broadcastdelay] [-s statsdir]
[-t trustedkey] [-U interface_update_time]
DESCRIPTION
The ntpd program is an operating system daemon that syn-
chronises the system clock with remote NTP time servers or
local reference clocks It is a complete implementation of
the Network Time Protocol (NTP) version 4, but also retains
compatibility with version 3, as defined by RFC 1305, and
versions 1 and 2, as defined by RFC 1059 and RFC 1119,
respectively
。。。
man page中还有对各参数的详细介绍。
OPTIONS
-4, --ipv4
Force DNS resolution of following host names on the
command line to the IPv4 namespace Cannot be used with
the --ipv6 option
-6, --ipv6
Force DNS resolution of following host names on the
command line to the IPv6 namespace Cannot be used with
the --ipv6 option
-a, --authreq
Require cryptographic authentication for broadcast
client, multicast client and symmetric passive associa-
tions This is the default This option must not
appear with authnoreq option
-A, --authnoreq
Do not require cryptographic authentication for broad-
cast client, multicast client and symmetric passive
associations This is almost never a good idea This
option must not appear with the authreq option
-b, --bcastsync
Enable the client to sync to broadcast servers
SunOS 510 Last change: 5
System Administration Commands ntpd(1M)
-c string, --configfile=string
The name and path of the configuration file,
/etc/inet/ntpconf by default
-d, --debug-level
Increase output debug message level This option may
appear an unlimited number of times
-D string, --set-debug-level=string
Set the output debugging level Can be supplied multi-
ple times, but each overrides the previous value(s)
-f string, --driftfile=string
The name and path of the frequency file,
/var/ntp/ntpdrift by default
-g, --panicgate
Allow the first adjustment to exceed the panic limit
Normally, ntpd exits with a message to the system log
if the offset exceeds the panic threshold, which is
1000s by default This option allows the time to be set
to any value without restriction; however, this can
happen only once If the threshold is exceeded after
that, ntpd will exit with a message to the system log
This option can be used with the -q and -x options
See the tinker configuration file directive for other
options
-k string, --keyfile=string
Specify the name and path of the symmetric key file
/etc/inet/ntpkeys is the default
-l string, --logfile=string
Specify the name and path of the log file The default
is the system log file
-L, --novirtualips
Do not listen to virtual IPs The default is to listen
-n, --nofork
Do not fork
-N, --nice
To the extent permitted by the operating system, run
ntpd at the highest priority
-p string, --pidfile=string
Specify the name and path of the file used to record
ntpd's process ID
SunOS 510 Last change: 6
System Administration Commands ntpd(1M)
-P number, --priority=number
To the extent permitted by the operating system, run
ntpd at the specified sched_setscheduler(SCHED_FIFO)
priority
-q, --quit
Set the time and quit ntpd will exit just after the
first time the clock is set This behavior mimics that
of the ntpdate program, which is to be retired The -g
and -x options can be used with this option Note: The
kernel time discipline is disabled with this option
-r string, --propagationdelay=string
Specify the default propagation delay from the
broadcast/multicast server to this client This is
necessary only if the delay cannot be computed automat-
ically by the protocol
-s string, --statsdir=string
Specify the directory path for files created by the
statistics facility This is the same operation as the
statsdir statsdir command
-t number, --trustedkey=number
Add a key number to the trusted key list This option
can occur more than once This is the same operation as
the trustedkey key command
-U number, --updateinterval=number
interval in seconds between scans for new or dropped
interfaces This option takes an integer number as its
argument
Give the time in seconds between two scans for new or
dropped interfaces For systems with routing socket
support the scans will be performed shortly after the
interface change has been detected by the system Use
0 to disable scanning 60 seconds is the minimum time
between scans
--var=nvar
make ARG an ntp variable (RW) This option may appear
an unlimited number of times
--dvar=ndvar
make ARG an ntp variable (RW|DEF) This option may
appear an unlimited number of times
-x, --slew
Slew up to 600 seconds
SunOS 510 Last change: 7
System Administration Commands ntpd(1M)
Normally, the time is slewed if the offset is less than
the step threshold, which is 128 ms by default, and
stepped if above the threshold This option sets the
threshold to 600 s, which is well within the accuracy
window to set the clock manually Note: Since the slew
rate of typical Unix kernels is limited to 05 ms/s,
each second of adjustment requires an amortization
interval of 2000 s Thus, an adjustment as much as 600
s will take almost 14 days to complete This option
can be used with the -g and -q options See the tinker
configuration file directive for other options Note:
The kernel time discipline is disabled with this
option
-, --help
Display usage information and exit
-!, --more-help
Extended usage information passed thru pager
--version
Output version of program and exit

1、到>